Ubhedu lweWomic, icandelo leIntsimbi yeWomic, ngumvelisi ochwephesha kunye nomthengisi wehlabathi jikelele weimibhobho yobhedu engenaoksijini, enikezela ngexabiso eliphezuluC10100 (OFE)iityhubhu zethusi eziqinisekisiweyo ngobumsulwa, umbane oqhuba kakuhle, kunye nokusebenza kakuhle koomatshini. Imveliso yethu ihambelana ngqo neI-ASTM B188kwayeB601, ukuqinisekisa ukuba yonke ityhubhu iyahlangabezana nemigangatho yamazwe ngamazwe yokusetyenziswa kwemizi-mveliso esebenza kakuhle.
Ngokukwazi ukulawula amanqanaba eoksijini ukuyangaphantsi njenge-5 ppmkunye netekhnoloji yokucoca ephucukileyo yokunciphisa ukungcola okupheleleyo ngaphantsi kwe-40 ppm, iWomic Copper ngumvelisi wakho okhethwayo weetyhubhu zekopolo ezichanekileyo kwiizitishi zombane, usetyenziso lwe-vacuum, izixhobo ze-elektroniki, kunye neenkqubo zokucoca.
1. Isishwankathelo seMveliso – C10100 I-Copper engena-oksijini
Inombolo ye-UNS: C10100
Isikhundla: OFE Copper (Copper ye-elektroniki engena-oksijini)
Ubumsulwa: ≥ 99.99% Cu
Umxholo weoksijini: ≤ 5 ppm (Ibhinqa linokulawula phakathi kwe-3–5 ppm)
Ukuqhuba koMbane: ≥ 101% IACS
Imigangatho:
●I-ASTM B188 – Ityhubhu yeCopper engenamthungo yokuCoca umoya kunye nokuFriji
●I-ASTM B68 / B75 – Ityhubhu yeCopper engenamthungo yoBunjineli obuQhelekileyo
●ASTM B280 – Udidi lwefriji
●EN 12735-1 – Iityhubhu zeCopper zokuCoca umoya nokuFriji
● GB/T 1527 – Iityhubhu zeCopper ezingenamthungo
● I-JIS H3300 – Umgangatho waseJapan weetyhubhu zeCopper neCopper Alloy
Iityhubhu zobhedu zeWomic C10100 azinaoksijini, zikumgangatho we-vacuum, kwaye zibonelela ngombane ophezulu, ukumelana nokugqwala, kunye nokuguquguquka, okwenza ukuba zilungele iinkqubo zombane kunye nobushushu obuphezulu.
Ukunyamezelana Okunemilinganiselo:
Ukunyamezelana Kokuthe Tye: ≤ 13 mm ubude obupheleleyo
Ukunyamezela Ubude: ± 13 mm
Imeko Yomphezulu: Icocekile kwaye ayinazo naziphi na iziphene okanye ukungcola komphezulu okunokuphazamisana nokusetyenziswa okucetywayo.
2. Ukwakheka kweeKhemikhali – I-OFE Copper ecocekileyo kakhulu (C10100)
I-Womic Copper iqinisekisa ukuba yonke ityhubhu yobhedu ye-C10100 idlulaUbumsulwa bobhedu obuyi-99.99%, kunyeumxholo weoksijini ulawulwa ngokungqongqo kwi-≤ 0.0005% (5 ppm)Inkcazelo epheleleyo yokungcola yile ilandelayo:
| I-elementi | Ubuninzi bePPM | I-elementi | Ubuninzi bePPM |
| I-Antimony (Sb) | 4 | Inkokeli (Pb) | 5 |
| I-Arsenic (As) | 5 | IManganese (Mn) | 0.5 |
| IBismuth (Bi) | 1 | I-Nickel (Ni) | 10 |
| I-Cadmium (i-Cd) | 1 | I-Phosphorus (P) | 3 |
| Intsimbi (Fe) | 10 | I-Selenium (Se) | 3 |
| Isilivere (Ag) | 25 | I-Sulfur (S) | 15 |
| ITellurium (Te) | 2 | Itini (Sn) | 2 |
| I-Zinc (Zn) | 1 | Ioksijini (O) | 0.0005 |
Umda woBungcola obupheleleyo:
I-Antimony + iSelenium + iArsenic + iTellurium + iBismuth + iTin + iManganese ................. Ubuninzi be-40 ppm
Umxholo weCopper= 100% – Ukungcola Okupheleleyo. Ukungcola okupheleleyo yimali yesilivere, isalfure, i-lead, i-tin, i-bismuth, i-arsenic, i-antimony, i-iron, i-nickel, i-mercury, i-zinc, i-phosphorus, i-selenium, i-tellurium, i-manganese, i-cadmium kunye ne-oxygen.
3. Iipropati zoMbane nezoMatshini
Iityhubhu zethu zobhedu ezingenaoksijini ze-C10100 zenzelwe ukuqhuba kakuhle kunye namandla, kunye nokusebenza rhoqo kwiibhetshi zemveliso.
| Ipropati | Ixabiso eliqhelekileyo |
| Ukuqhuba kombane | ≥I-101% IACS |
| Ukumelana nombane (20°C) | ≤0.15713 Ω·g/m2 |
| Ukuqhuba kweThermal | ≥398 W/m·K |
| Amandla okuThamba (ubushushu be-H80) | ≥245 MPa |
| Unikeze Amandla | ≥205 MPa |
| Ukwandiswa (ngaphezulu kwe-5D) | ≥5% |
| Ubulukhuni (Brinell HBW) | Ubuncinci80 |
| Ubungakanani beenkozo (ngokwe-ASTM E112) | Ingqolowa Entle Efanayo |
4. Ukusetyenziswa kweC10100 Copper Tubing
Iityhubhu zethu zobhedu ezingenaoksijini zilungele iindawo ezibalulekileyo ezifuna ubunyulu obuphezulu kakhulu, iimpawu zombane ezizinzileyo, kunye nomgangatho ogqibeleleyo:
●Uthumelo lwamandla kunye neeStation – iityhubhu zebhasi zeCopper, ii-conductors kwiStation ze-110–500 kV
● Iinkqubo zoVutha kunye neeAccelerators – i-UHV-compatible, i-hydrogen-free copper ye-particle physics
●I-Aerospace kunye ne-Electronics yoMkhosi – Iinkqubo zocingo, ii-waveguides, ii-RF cavities
●I-Cryogenics kunye ne-Medical Imaging – Ukuhanjiswa kwe-helium/nitrogen engamanzi, izixhobo zomatshini we-MRI
● I-HVAC kunye neFriji – Iityhubhu ezingenamthungo nezicocekileyo kakhulu zeenkqubo zokupholisa ezichanekileyo
●Izixhobo zeSemiconductor kunye neCleanroom – Imibhobho engenaoksijini yegesi kunye neentambo zokupholisa
● Ii-Solar Inverters kunye neeNkqubo zeBhetri – Iibhasi eziqhuba umbane ophezulu kunye nee-interconnects
5. Ulawulo loMgangatho kunye noVavanyo lweLebhu
Ukuze kuhlangatyezwane nemigangatho ephezulu, iWomic Copper idibanisa iinkqubo zokuhlola ezibanzi zangaphakathi, kuquka:
Izixhobo Eziphambili:
● Isihlalutyi se-oksijini (esekelwe kwi-IR) – Sibona i-oksijini ukuya kwi-<3 ppm
● I-Atomic Absorption Spectrometer – Ilinganisa ukungcola okuncinci kwesinyithi
● Abavavanyi bangoku be-Eddy – Ukufunyanwa kweziphene ezingatshabalalisiyo
● Abavavanyi boBulukhuni beBrinell kunye neVickers – Baqinisekisa ukuba iipropati zoomatshini zihlala zifana
● Uhlalutyo lweMikroskopu (i-SEM + iMetallography) – Uvavanyo lweenkozo kunye nokubandakanywa
● Iimashini zoVavanyo lwe-Universal Tensile - Ukuqinisekiswa ngokupheleleyo kwamandla oomatshini
● Uvavanyo lokuHamba (Umlinganiselo we-IACS) – Luqinisekisa ukusebenza kwe-≥101%
Uvavanyo lweQela lesithathu:
Sixhasa ngokupheleleyo ukuhlolwa ziinkampani eziqinisekisiweyo kwihlabathi liphela ezifana ne-SGS, i-TÜV, i-BV, kunye ne-DNV, ngeengxelo ezineenkcukacha ezikhutshwe ngaphambi kokuba zihanjiswe.
6. Inkonzo yokuPakisha, yoThumelo kunye neFektri
I-Womic Copper ibonelela ngephakheji ekhuselekileyo nekumgangatho wokuthumela ngaphandle ukukhusela umgangatho wemveliso ngexesha lokuthunyelwa kwempahla ekhaya okanye kwamanye amazwe.
Iimpawu zokuPakisha:
● Iikhaphu zeplastiki zokuphela + ukusonga ngepoly nganye
●Iingxowa ze-PE ezivaliweyo nge-vacuum ukuthintela i-oxidation
● Iibhokisi zomthi ezifunxiweyo ezinebhendi yentsimbi eqinisiweyo
● Ityhubhu nganye ebhalwe inombolo yobushushu, inombolo yelothi, kunye neenkcukacha
Uthutho:
●Ifumaneka kwi-FCL, i-LCL, kunye neenqwelomoya
●Inkonzo yezothutho iquka i-CIF, i-FOB, i-DDP, kunye ne-EXW
●Ukulayisha okuqinisiweyo + ukubethelwa ukuze kuthunyelwe umgama omde
●Amaxwebhu alungiselelwe iiarhente zerhafu, izibuko, kunye neearhente zamaqela esithathu
7. Kutheni Ukhetha iWomic Copper
●Ulawulo lwe-oksijini esezantsi kakhulu – 3–5 ppm inqanaba leoksijini, elikhokelayo kushishino
●Imveliso Engenamthungo Ephucukileyo – Ubushushu obupheleleyo + umzobo obandayo, ukutsalwa kwe-annealing, ubushushu be-H80
● Inkqubo yokulandelela i-QC eyi-100% – Ukulandeleka kwedijithali ukusuka ekuqaleni ukuya ekupheleni
●Amava eProjekthi eHlabathini Lonke – Iinkqubo zesitishi esingaphantsi kwe-500kV ezibonelelwa eAsia naseYurophu
●Uhlolo lweFektri lwamkelekile – Ukuhlolwa kwendawo, imveliso ecacileyo
●Ukhuseleko kunye neHlabathi liphela – Ukuhanjiswa ngexesha elifanelekileyo kunye namaxwebhu apheleleyo
Ixesha leposi: Epreli-05-2025