1. Ukuchongwa kweMveliso
Igama lemveliso: Intsimbi yeCarbon yeSAE / AISI 1020 — Iibha ezijikelezileyo / ezisikwere / ezithe tyaba
Ikhowudi yemveliso yeWomic Steel: (faka ikhowudi yakho yangaphakathi)
Ifomu yokuhanjiswa: Itshiswe ngobushushu, ilungelelaniswe, itsalwe ngokubandayo (igqityiwe ngokubandayo) njengoko kuchaziwe
Iindlela eziqhelekileyo zokusetyenziswa: iishafts, iipins, ii-stud, ii-axles (eziqiniswe ngoonobumba), iindawo zoomatshini ezisetyenziswa ngokubanzi, izihlahla, izibophelelo, izixhobo zoomatshini bezolimo, iindawo zokwakha ezinamandla aphantsi aphakathi.
2. Isishwankathelo/Isishwankathelo sesicelo
I-SAE 1020 yintsimbi ebhityiweyo ekumgangatho ophantsi, esetyenziswa kakhulu apho kufuneka amandla aphakathi, ukudityaniswa kakuhle kunye noomatshini abafanelekileyo. Ihlala ibonelelwa kwiimeko ezishushu okanye ezigqityiweyo kubanda kwaye isetyenziswa rhoqo nokuba kwimeko ebonelelweyo okanye emva kokulungiswa kwesibini (umz., ukugalelwa kwekhabhathi, unyango lobushushu, ukugaywa). I-Womic Steel inikezela ngeebha ze-1020 ngolawulo lomgangatho oluhambelanayo kwaye inokubonelela ngeenkonzo ezongezelelweyo ezifana nokugaya, ukulula, ukuqinisa ikhabhathi kunye nokugaywa ngokuchanekileyo.
3.Ulwakhiwo oluqhelekileyo lweekhemikhali (wt.%)
| I-elementi | Uluhlu oluQhelekileyo / Ubuninzi (%) |
| Ikhabhoni (C) | 0.18 – 0.23 |
| IManganese (Mn) | 0.30 – 0.60 |
| I-Silicon (Si) | ≤ 0.40 |
| I-Phosphorus (P) | ≤ 0.040 |
| I-Sulfur (S) | ≤ 0.050 |
| I-Copper (Cu) | ≤ 0.20 (ukuba kuchaziwe) |
4.Iipropati zeMishini eziqhelekileyo
Iimpawu zoomatshini ziyahluka ngokwemeko yokwenziwa (ezitshisiweyo, ezilungelelanisiweyo, ezifakwe i-anneal, ezitsalwa ngokubandayo). Uluhlu olungezantsi luxabiso oluqhelekileyo kushishino; sebenzisa i-MTC ukuze ufumane ixabiso lesivumelwano eliqinisekisiweyo.
I-Hot-rolled / Ilungelelaniswe:
- Amandla okutsalwa (UTS): ≈ 350 – 450 MPa
- Amandla okuvelisa: ≈ 250 – 350 MPa
- Ukwandiswa: ≥ 20 – 30%
- Ubunzima: 120 - 170 HB
Itsalwe Ngobandayo:
- Amandla okutsalwa (UTS): ≈ 420 – 620 MPa
- Amandla okuvelisa: ≈ 330 – 450 MPa
- Ukwandiswa: ≈ 10 – 20%
- Ubunzima: buphezulu kune-hot-rolled
5. Iimpawu ezibonakalayo
Ubuninzi: ≈ 7.85 g/cm³
Imodulus ye-Elasticity (E): ≈ 210 GPa
Umlinganiselo kaPoisson: ≈ 0.27 – 0.30
Ukuqhuba kunye nokwandiswa kobushushu: okuqhelekileyo kwiintsimbi ezinekhabhoni ephantsi (jonga iitafile zobunjineli ukuze ufumane ubalo loyilo)
6.Unyango lobushushu kunye nokusebenza kakuhle
Ukufakelwa kobushushu: ubushushu obungaphezulu kobubanzi bokuguqulwa, ukuphola kancinci.
Ukulungisa: phucula isakhiwo sengqolowa, uphucule ukuqina.
Ukucima kunye nokunciphisa: ukuqinisa ngokuthe ngqo; ukuqinisa ikesi kuyacetyiswa.
I-Carburizing: ixhaphakile kwi-SAE 1020 kumphezulu oqinileyo/umbindi oqinileyo.
Ukusebenza ngobushushu: kwandisa amandla, kunciphisa ukuguguleka.
7. Ukudityaniswa kunye nokuveliswa
Ukudityaniswa:Kulungile. Iinkqubo eziqhelekileyo: SMAW, GMAW (MIG), GTAW (TIG), FCAW. Ubushushu abufuneki ngokubanzi kwiindlela eziqhelekileyo zobukhulu; landela iinkcukacha zenkqubo yokuwelda (i-WPS) kwizakhiwo ezibalulekileyo.
Ukugquma/Ukutywina:iindlela ezisemgangathweni ziyasebenza.
Ubuchule bokusebenza:Kulungile — oomatshini abayi-1020 ngokulula; umatshini weebhari ezitsalwa ngokubandayo ngokwahlukileyo kwiibhari ezifakwe i-annealed (izixhobo kunye neeparameters zilungisiwe).
Ukuyila/Ukugoba:Ukuqina kakuhle xa i-annealed; imida ye-radius yokugoba ixhomekeke kubukhulu kunye nemeko.
8. Iifom ezisemgangathweni, ubungakanani kunye nokunyamezelana
I-Womic Steel inika iibhari ngobukhulu obufanayo bezorhwebo. Ubungakanani obulungiselelwe wena bufumaneka xa uceliwe.
Iifom zezibonelelo eziqhelekileyo:
Iibha ezingqukuva: Ø6 mm ukuya ku-Ø200 mm (ububanzi bomda buxhomekeke kubuchule bomatshini wokugaya)
Iibha zesikwere: 6 × 6 mm ukuya kuthi ga kwi-150 × 150 mm
Iibha ezithe tyaba/ezibuxande: ubukhulu nobubanzi ngokwe-odolo
Iziphelo ezisikiweyo zibe zinde, zinqunyulwe, okanye zishushu; iibhari ezigudisiweyo nezingenambindi ziyafumaneka.
Ukunyamezela kunye nokugqitywa komphezulu:
Ukunyamezelana kulandela iinkcukacha zabathengi okanye imigangatho efanelekileyo (ASTM A29/A108 okanye elinganayo kwiishafti ezigqityiweyo kubanda). I-Womic Steel inokubonelela ngomhlaba ochanekileyo (h9/h8) okanye iguqulwe ibe yimfuno.
9. Uhlolo kunye noVavanyo
I-Womic Steel yenza okanye ingabonelela ngamaxwebhu ovavanyo alandelayo:
Uvavanyo oluqhelekileyo (luqukiwe ngaphandle kokuba kuchazwe ngenye indlela):
Uhlalutyo lweekhemikhali (i-spectrometric / i-wet chemistry) kunye ne-MTC ebonisa ulwakhiwo lokwenyani.
Uvavanyo lokutsalwa (ngokwesicwangciso sokuthatha isampuli esivunyiweyo) — amaxabiso engxelo ye-UTS, YS, Elongation.
Ukuhlolwa okubonakalayo kunye nokuqinisekiswa kobukhulu (ububanzi, ukuthe tye, ubude).
Uvavanyo lokuqina (iisampulu ezikhethiweyo).
Ukhetho:
Uvavanyo lwe-Ultrasonic (UT) lweziphene zangaphakathi (100% okanye isampuli).
Uvavanyo lweeNgcambu zeMagnetic (MT) kwiimfanta zomphezulu.
Uvavanyo lwe-Eddy-current lweziphene zomphezulu/kufutshane nomphezulu.
Uvavanyo olungaqhelekanga lwesampulu kunye nokuhlolwa ngumntu wesithathu (nguLloyd's, ABS, DNV, SGS, Bureau Veritas, njl.njl.).
Iintlobo zesatifikethi ezipheleleyo ze-MTC kunye neziqinisekiso xa ziceliwe (umz., izatifikethi zesitayile se-ISO 10474 / EN 10204 apho kufanelekileyo).
10.Ukhuseleko Lomphezulu, Ukupakisha kunye Nezothutho
Ukhuseleko lomphezulu:i-oyile yokuthintela umhlwa kancinci (eqhelekileyo), izigqubuthelo zeplastiki zeerandi (ukhetho), ukupakisha okongezelelweyo kokuthintela umhlwa kwiihambo ezinde zaselwandle.
Ukupakisha:zibotshelelwe ngeentambo zentsimbi, inkunkuma yomthi ethunyelwa kwamanye amazwe; iibhokisi zomthi zeebhari zokugquma ezichanekileyo ukuba kuyimfuneko.
Ukuchongwa/uphawu:iphakheji nganye/ibha ephawulwe ngenombolo yobushushu, inqanaba, ubungakanani, igama leWomic Steel, kunye nenombolo ye-PO njengoko kuceliwe.
11.Iinkqubo zoMgangatho kunye neSatifikethi
I-Womic Steel isebenza phantsi kwenkqubo yolawulo lomgangatho ebhaliweyo (ISO 9001).
I-MTC iyafumaneka kwi-heat/batch nganye.
Ukuhlolwa komntu wesithathu kunye nokuvunywa kokuhlelwa kwemibutho kunokucwangciswa ngokwesivumelwano.
12.Iindlela Eziqhelekileyo Zokusebenzisa/Ukusetyenziswa
Ubunjineli ngokubanzi: ii-shafts, ii-pins, ii-studs kunye nee-bolts (ngaphambi konyango lobushushu okanye ukuqina komphezulu)
Izixhobo zezithuthi zezicelo ezingabalulekanga okanye njengezinto eziphambili zezixhobo ezine-carburized
Izixhobo zoomatshini bezolimo, izihlanganisi, iindawo zoomatshini kunye nezixhobo
Ukwenziwa okufuna ukudityaniswa kakuhle kunye nokuqina okuphakathi
13.Iingenelo kunye neenkonzo zeWomic Steel
Amandla okugaya iibhari ezigutyungelwe ngobushushu nezigqityiweyo kubanda ezinolawulo oluqinileyo nolunemilinganiselo.
Ilebhu yomgangatho wangaphakathi yovavanyo lweekhemikhali kunye noomatshini; I-MTC ikhutshwa ngobushushu ngabunye.
Iinkonzo ezongezelelweyo: ukugaywa ngokuchanekileyo, ukugaywa okungenaziko, ukugaywa, ukugaywa kwekhava (ngee-ovens ezisebenzisanayo), kunye nokupakishwa okukhethekileyo ukuze kuthunyelwe kwamanye amazwe.
Amaxesha okukhokela akhuphisanayo kunye nenkxaso yezothutho yehlabathi.
Siyazingca ngeiinkonzo zokwenza ngokwezifiso, imijikelo yemveliso ekhawulezayokunyeinethiwekhi yokuhambisa umbane kwihlabathi liphela, ukuqinisekisa ukuba iimfuno zakho ezithile ziyafezekiswa ngokuchanekileyo nangokugqwesileyo.
Iwebhusayithi: www.womicsteel.com
I-imeyile: sales@womicsteel.com
Ucingo/WhatsApp/WeChat: Victor: +86-15575100681 okanye uJack: +86-18390957568
Ixesha leposi: Sep-12-2025