1. Umenzi weeSlag Shovels: Ubukho kunye nomthamo weWomic Steel
I-Womic Steel ngumvelisi ochwephesha kunye nomthengisi ngaphandle kwenkampaniiifosholo zeslag(ekwaziwa ngokuba ziifosholo ze-slag dredging, iibhakethi ze-slag, okanye iifosholo ze-foundry) eziseTshayina. Ngaphezulu kweminyaka engama-20 yamava ekuveliseni intsimbi yekhabhoni kunye neemveliso zetyhubhu zentsimbi edibeneyo, isityalo sethu se-foundry sisebenzisa izixhobo zemodyuli ezichanekileyo kakhulu kunye netekhnoloji ye-computer-assisted simulation (CAE) ukuqinisekisa ukuthembeka kwesakhiwo semveliso nganye eyenziwe ngentsimbi kwisiqwenga esinye.
Imveliso yeNyanga:Iitoni ezingaphezu kwama-2,000 zeentsimbi ezibunjiweyo, kuquka neeladle zeslag ezineeyunithi eziziiyunithi ezifikelela kwiitoni ezili-100.
Ukwenziwa ngokwezifiso okugqithisileyo:Siyila kwaye senza nawuphi na umthamo (5 - 100 t), ubukhulu, izinto, kunye nokugqitywa ngokusekelwe kwimizobo yomthengi kunye neemeko zokusebenza kwesithando sakhe.
2. Ukwakhiwa kwezinto kunye nokusebenza kweSpun yeSludge
2.1 Izixhobo zeNsimbi yodidi (ZG)
Ngokwemigangatho yamazwe ngamazwe esetyenziswa kushishino lwentsimbi (i-ASTM, i-DIN, i-ISO, i-JIS), izipuni ze-Womic Steel slag zihlala zibunjwa ngamabakala asele emiselwe, afana nala alandelayo, ngalinye linesimo esithile sokwakheka ukuze likwazi ukumelana namaqondo obushushu aphezulu (+1,600 °C):
| Ibanga | Amandla okuKhula (i-MPa) | Amandla okuThamba (MPa) | Ukwandiswa (%) | Isicelo Esicetyiswayo |
| I-ZG270-500 | ≥270 | ≥500 | ≥18 | Ibhakethi esetyenziswa ngokubanzi (engabizi kakhulu) |
| I-ZG310-570 | ≥310 | ≥570 | ≥15 | Imijikelo yomsebenzi onzima |
| I-GS-20Mn5 | ≥300 | 480-630 | ≥22 | Iimfuno zokusebenza ezifanelekileyo, imozulu ebandayo |
| I-ASTM A27 65-35 | ≥241 | ≥448 | ≥24 | Isiqinisekiso saseMelika, iiprojekthi |
2.2 Iipropati zeeKhemikhali (Uhlalutyo, Amaxabiso epesenti yobunzima, %)
| I-elementi | I-ZG270-500 (Esemgangathweni) | I-GS-20Mn5 (Esemgangathweni) | I-ASTM A27 60-30 |
| Ikhabhoni (C) | 0.30 – 0.37 % | 0.18 – 0.23 % | 0.28 – 0.32 % |
| I-Silicon (Si) | 0.30 – 0.50 % | 0.30 – 0.50 % | 0.30 – 0.60 % |
| IManganese (Mn) | 1.10 – 1.40 % | 1.00 – 1.50 % | 0.90 – 1.20 % |
| I-Phosphorus (P) | ≤ 0.030 % | ≤ 0.020 % | ≤ 0.040 % |
| I-Sulfur (S) | ≤ 0.030 % | ≤ 0.020 % | ≤ 0.040 % |
| I-Chromium (Cr) | – | ≤ 0.30 % | – |
| I-Nickel (Ni) | – | ≤ 0.40 % | – |
| I-Molybdenum (Mo) | – | ≤ 0.10 % | – |
Iipuni zeslate zeefurniture zombane (EAF) zixhasa umyinge wemijikelo eli-15-20 ngosuku. I-alloy yekhabhoni ephantsi (<0.23%) kunye nokongezwa kwe-molybdenum kunye ne-nickel kuphucula ukuqina kwayo kunye nokumelana nokuqhekeka kokudinwa kobushushu.
2.3 Iimpawu zoomatshini
Umda we-elastic:270 – 310 MPa (ZG), 300 MPa (GS 20Mn5). Umda ophezulu we-elastic (GS 20Mn5) uyalibazisa ukuguquguquka kweplastiki phantsi kweemeko zokuxinana kakhulu.
Ukutsalwa:Icephe le-slag le-ZG270 500 linobude obuyi-18%, ngelixa amanqanaba e-ASTM A27 kunye ne-GS 20Mn5 efikelela kwi-22 24%; Oku kubonisa amandla aphezulu okufunxa amandla ngaphambi kokuba kwaphuke.
Ukumelana nokudinwa bubushushu (ukulinganisa i-CAE):Izinto ze-GS 20Mn5, ezinyangwa ngobushushu ngobushushu bomoya obulawulwayo, zimelana nemijikelo engama-3,200 (ΔT 1,300 °C) ngaphambi kokuba ziqhekeke, zingaphezulu nge-115% kunentsimbi yekhabhoni eqhelekileyo.
2.4 Ubushushu obuphezulu benkonzo kunye nokumelana noxinzelelo lobushushu
Ubushushu obuphezulu obuqhubekayo:~600°C kwi-ZG270 500 kunye ne-ASTM A27; ~650°C kwi-GS 20Mn5.
Ukumelana noxinzelelo lobushushu:Intsimbi ecolekileyo (GS 20Mn5) imelana nemijikelo engaphezulu kwama-3,000 epheleleyo (ukufudumeza ukusuka kuma-300°C ukuya kwi-1,600°C kunye nokuphola komoya ngequbuliso), nto leyo ephinda kabini ubomi bomgangatho oqhelekileyo.
3. Isikhokelo sobungakanani: Umthamo, Ubunzima, kunye nobukhulu (Umzekelo we-30t Slag Shovel)
| Umthamo (t) | Ubunzima obumalunga (t) | Umthamo oPhakathi (m³) | Ububanzi bomlomo (mm) | Ubude obupheleleyo (mm) |
| 20 t (Esemgangathweni) | 25 – 30 t | 12 – 16 m³ | 1,800 | 1,500 |
| 30 t | 33 – 40 t | 18 – 22 m³ | 2,200 | 1,800 |
| 40 t | 42 – 52 t | 24 – 28 m³ | 2,500 | 2,100 |
| 50 t | 52 – 62 t | 29 – 35 m³ | 2,800 | 2,400 |
| 70 t | 60 – 72 t | 40 – 50 m³ | 3,200 | 2,700 |
| 85 – 100 t | 75 – 105 t | 45 – 65 m³ | 3,600 | 3,000 |
Uyilo lokugqibela kunye nobukhulu benziwa ngokwemilinganiselo kunye neemfuno ezichazwe kwisicwangciso somthengi (umbono wokuphakama, ububanzi obukhulu bekreyini, ukuphakama phantsi komthungi, njl.njl.).
4. Inkqubo yoMveliso: Ukuphoswa kweSiqwenga esinye esiHlangeneyo
Inkqubo yokuvelisa yeiladle yeslagngolu hlobo lulandelayo:
Ubunjineli obuNcedwa yiKhompyutha (CAE) ngeSoftware yokulinganisa ukuqina kweHuazhu®: Iingcali zethu zichaza imodeli ye-3D kwaye zilinganise ukuqina kwesinyithi esinyibilikisiweyo. Injongo kukufumanisa naziphi na iziphene zokubumba (imingxuma yokuncipha, ukubola, ukufakwa) ngaphambi kokuveliswa kweepateni zomthi okanye ukuprintwa kwe-3D kwezibumba.
Imveliso yeePateni kunye neeMolds zeSand eziPrintiweyo ze-3D (iResin Fusion): Iipateni zomthi okanye zesinyithi zenziwa ngokoyilo lomthengi. Kwiindawo ezichanekileyo, singasebenzisa iimold zesanti eziprintiweyo ze-3D.
Ukunyibilikisa nokuCoca: Inkunkuma yentsimbi ekhethiweyo iyatshajwa. I-Electric Arc Furnace (EAF) iyayinyibilikisa itshaja; isinyithi esinyibilikisiweyo emva koko sidlulela kwisikhululo se-Ladle Furnace (LF) ukuze sicocwe – ukunciphisa i-S, P, O₂, H₂ – kunye nokulungiswa kokwakheka kwayo. Emva kokucoca, i-vacuum degassing (VD) iyenziwa ukususa iigesi ezinyibilikisiweyo (H₂ < 2 ppm).
Ukuphosa iSingle-Pour: Umzimba wonke, kunye nee-trunnion ezimbini ezidibeneyo, ugalelwa kumsebenzi omnye wokubumba ngokuqhubekayo. Akukho kudityaniswa kwanoma yiluphi uhlobo.
Unyango lobushushu: Ukulungisa kunye/okanye ukucima isithando somlilo esifana nentsimbi, kunye nokurekhoda ubushushu okuqhubekayo (ijika lobushushu bexesha) elibonelela ngokulandelela okupheleleyo.
Ukuqhumisa isanti, ukuCoca, ukuGqiba kunye nokuMatshini (ukuba kuyimfuneko): Izitshisi ezivela kwinkqubo yokondla ziyasuswa kwaye iindawo ziyacolwa ukuze kugqitywe umgangatho ophezulu.
Uvavanyo olungonakalisiyo oluyi-100% (NDT): Ukuhlolwa okubonakalayo, uvavanyo olupheleleyo lwe-ultrasonic (UT) lwentsimbi luyenziwa, kwaye uvavanyo lwe-magnetic particle (MT) kunye novavanyo lwe-liquid penetrant (PT) lusetyenziswa kwiindawo ezibalulekileyo (ii-trunnions, ii-junction radii).
Ukumakisha kunye nokuPakisha: Ukukrola inani lesamente, umthamo, ubunzima, umhla wokuveliswa. Ipeyinti yangaphandle (engwevu yesilivere) ikhusela ngexesha lokuthuthwa ngolwandle.
5. Ulawulo loMgangatho kunye neziqinisekiso
5.1 Ukuhlolwa novavanyo lomgangatho
| Iqonga | Uhlobo lokuhlola | Umgangatho / Indlela | Iikhrayitheriya zoKwamkelwa |
| Irisithi ye-Scrap | Ukwenziwa kweeKhemikhali | I-OBLF GS‑1000 Spectrometer | Ukuqinisekiswa kweBanga leNtsimbi (ZG / ASTM / DIN) |
| Inkqubo yokunyibilikisa | Iisampulu zeLadle | I-Spectrometer + iiThermocouples | Ukuthobela iNkcazelo epheleleyo yoMthengi |
| Ukulinganisa iiModeli | Uvavanyo lweMilinganiselo | Izixhobo zeCMM / iLaser Tracker | ±5 mm (kwii-trunnions) / ±10 mm (ubukhulu bejometri) |
| Unyango lobushushu bentsimbi ye-cast | Ukurekhoda Ubushushu | Irekhoda yobushushu bexesha eliqhubekayo | Ijika elilandelekayo neliqinisekisiweyo |
| Uvavanyo lwe-NDT Ultrasonic (UT) | JB/T5000.14 Inqanaba eliQhelekileyo 1 kunye neNqanaba lesi-2 (uHlelo lwesi-2) | Izixhobo zovavanyo lwe-Ultrasonic ezizenzekelayo | Inqanaba 1 lee-trunnion (ubunzulu obuyi-500 mm). Inqanaba 3 lomzimba jikelele |
| Uvavanyo lweMagnetic Particles (MT) | I-ASTM E709 / GB/T 9444 esemgangathweni | Izixhobo zeMagnetic Yoke | Izalathisi ezibonisa umgca ongaphezulu kwe-2 mm azivumelekanga |
| Uvavanyo lwe-Liquid Penetrant (PT) | I-ASTM E165 / GB/T 9443 esemgangathweni | Ukutshiza | Akukho zibonakaliso zokuqhekeka |
| Uvavanyo lweMilinganiselo | NgeLaser Tracker | Izixhobo Zokulinganisa Eziphathekayo | ±10 mm kwimilinganiselo yangaphandle |
| Ukuqina | Uvavanyo loBulukhuni beLeeb | Amanqaku angama-20 - iimilinganiselo ezili-150 | Ukufana ±10 HB |
Isatifikethi sokugqibela: Uhlobo lwe-EN 10204 3.1(umgangatho),Uhlobo lwe-EN 10204 3.2(xa iceliwe, kunye nobukho be-arhente yokuhlolwa).
5.2 Iziqinisekiso zeNsimbi yeWomic
I-ISO 9001:2015– Inkqubo yolawulo lomgangatho evunyiweyo.
I-PED 2014/68/EU (Uphawu lwe-CE)– Iyahambelana neMiyalelo yeZixhobo zoXinzelelo zaseYurophu.
I-ISO 14001:2015– Ukuzibophelela kulawulo lokusingqongileyo (sifuna ukukhusela okusingqongileyo).
I-ISO 45001:2018– Ingqwalasela ekhethekileyo kwimpilo nokhuseleko emsebenzini.
Isatifikethi sokuhlola somntu wesithathu (SGS, BV, TÜV, ABS, DNV, LR) xa siceliwe.
6. Usetyenziso lweSludge Spoon
Ngenxa yesakhiwo sayo esomeleleyo kunye nokuguquguquka okuphezulu kokwenza ngokwezifiso, iiladle ze-Womic Steel slag zisetyenziswa kakhulu kwiindawo ezahlukeneyo zoshishino. Iimeko eziphambili zokusetyenziswa zezi zilandelayo:
Izityalo zeNsimbi nezeNsimbi eziDibeneyo:Isebenza kwiinkqubo zokwenza intsimbi kunye ne-BOF/LD. Ezi zilayi zisetyenziselwa ukudlulisa i-slag ukusuka kwii-converters ukuya kwiiyadi ze-slag kunye nezikhululo zokukhupha i-slag.
Izityalo zokwenza intsimbi ze-Electric Arc Furnace (EAF):Iileyile ze-slag ezikhethekileyo ze-EAF zilungele imijikelo yokuzalisa nokukhupha itshaja ngokukhawuleza, zifanelekile kwiindawo zemveliso ezinobushushu bokusebenza obungaphezulu kwe-1600°C.
Iindawo zokuseka isinyithi nentsimbi:Isetyenziselwa ukuqokelela nokukhupha i-slag kwiifurniture ze-cupola, iifurniture ze-induction ezisetyenziswa rhoqo kunye neefurniture ze-blast.
Izityalo Zokucubungula Isinyithi Ezingenazo I-ferrous (Ubhedu, I-Zinc, I-Lead):Iiladle ze-slag ezinikezelwe kushishino olungena-ferrous zixhotyiswe nge-linings ezinganamatheliyo ukuthintela ukunamathela kweekhemikhali kwizinto.
Izityalo zeKhemikhali kunye neZityalo zokuRisayikilisha iSlag.
7. Iingenelo zeWomic Steel ngaphezu kwabanye abavelisi
Kwiminyaka engaphezu kwama-20 kuveliswa izixhobo zentsimbikwimizi-mveliso yentsimbi neyemigodi.
Itekhnoloji yokulinganisa ye-CAE ephucukileyo:Siqinisekisa umgangatho ngaphambi kokuveliswa kwesikhunta.
Umgangatho wentsimbi oqinisekisiweyo:Ngeenkqubo zokunyibilikisa i-EAF + Ladle Furnace (LF) + Vacuum Degassing (VD). Ukususela kwintsimbi ekhethiweyo ekhethiweyo ekumgangatho ophezulu.
Uvavanyo olupheleleyo olungonakalisiyo (NDT):UT (100%), MT (ukuhlolwa kwe-magnetic particle), PT (ukuhlolwa kwe-dye penetrant) kunye neengxelo zefoto.
Ukwenziwa ngokwezifiso okugqithisileyo kunye namaxesha okuhambisa ngokukhawuleza:Iintsuku ezingama-35–50 ukusuka ekuvunyweni komzobo wobugcisa.
Ubungakanani obukhulu bokuvelisa:Iqhekeza elinye ukuya kuthi ga kwiitoni ezingama-300.
Umthamo omkhulu wokuthunyelwa kwamanye amazwe:Ukuthunyelwa kwiindawo zokufikela kuzo ngeendlela ezahlukeneyo zothutho (isikhongozeli, i-flat rack, i-project cargo) phantsi kwe-CIF, i-FOB, njl.njl.
Amaxwebhu apheleleyo:Sinikezela ngeencwadi zokulungisa, imizobo eyakhiweyo kunye nekopi yedijithali (isatifikethi ngokwe-EN 10204 3.1/3.2).
8. Ukupakisha kunye noLogistics kwiThutho lwaMazwe ngaMazwe
8.1 Ukupakisha icephe le-sludge
Ukhuseleko Lomphezulu:Ioyile yokulwa nokugqwala esetyenziswa kwiindawo ezifakwe ngomatshini (iindawo zangaphakathi, ii-trunnion); iindawo ezincinci ezisongelwe ngeefilimu zeplastiki ezahlukeneyo.
Iiflanges zesinyithi kunye neebrakethi ze-engile:Khusela imiphetho kunye nee-trunnion kumonakalo obangelwa yimpembelelo.
Iinkxaso zentsimbi / iibhloko zomthi:Iladi ibekwa kwizakhelo zentsimbi ezinamathele kwiziseko zomthi ukuze kuthintelwe ukushukuma ngexesha lokulayisha nokuthuthwa.
Ukwaleka Kwangaphandle:Yonke imveliso igqunywe ngokupheleleyo nge-tarpaulin yeplastiki engangeni manzi, kunye neengxowa ze-silica gel desiccant ngaphakathi.
Ukumakisha:Iimpawu ezicacileyo nezingapheliyo eziquka umthamo, ubunzima obupheleleyo, iziko lomxhuzulane, iindawo zokuphakamisa kunye nenombolo yeodolo yomthengi.
8.2 Iindlela zokuthumela
Izikhongozeli zoLwandle ze-20GP / 40GP / 40HQ:Ilungele izinto eziziithoni ezingama-25-28. Iimveliso ezingaphantsi kweetoni ezingama-30 (iimodeli ezifikelela kwiitoni ezingama-35) zipakishwa kwiibhokisi zomthi kwaye zithunyelwa ngezikhongozeli ezipheleleyo eziqhelekileyo.
Irekhi Ethe tyaba kunye neeKhonteyina ezivulekileyo eziphezulu:Ilungele imithwalo ukuya kuthi ga kwiitoni ezingama-45 (iitoni ezingama-30-50), iqiniswe ngokuqinileyo ngeetyathanga zokubopha kunye neenkqubo zokutshixa.
Ukuthunyelwa kwe-Break Bulk kunye ne-RORO:Ifakelwa imithwalo engaphezu kweetoni ezingama-20. Impahla enzima kakhulu ihanjiswa ziinqanawa zemithwalo eziqhelekileyo kwaye iqiniswe ngemiqadi yokuphakamisa.
8.3 Amaxwebhu okuthumela aqukiwe
I-invoyisi yentengiso
Uluhlu lokupakisha
Isatifikethi semvelaphi (iFomu E okanye i-CO, kuxhomekeke kwilizwe oya kulo)
Ulwazi lokuThuthwa ngeNqanawa yoLwandle
Izatifikethi zovavanyo (EN 10204 3.1 / 3.2)
Ingxelo yokuGqibela (UT, MT, PT)
Iifoto zokumakisha, ubungakanani kunye nokupakishwa kokugqibela
Isatifikethi seinshorensi yokuthutha ulwandle (xa iceliwe)
9. Imibuzo Ebuzwa Rhoqo (Imibuzo Ebuzwa Rhoqo)
Umbuzo 1: Yintoni umahluko phakathi kweladle ye-slag kunye neladle yokugalela?
A: Iladle ye-slag yenzelwe ukuhambisa nokugalela i-slag enyibilikisiweyo (i-silicate, ilayimu, i-MgO, njl.njl.). Iladle yokugalela isetyenziselwa ukuthutha intsimbi engamanzi ngokuthe ngqo kwaye idla ngokugqunywa ngezinto ezingafunekiyo. Siziingcali kuphela kwiiladle ze-slag kunye neembiza ze-slag.
Umbuzo 2: Zingaphi ii-Womic Steel slag ladles ezinokuthi zifikelele kuzo?
A: Iiladle zesinyithi sekhabhoni eziqhelekileyo zifikelela ubuncinci kwimijikelo eyi-5,000. Iiladle ezenziwe ngezinto ze-GS-20Mn5 ezinonyango lokucima nokufudumala ubushushu zinokudlula imijikelo eyi-8,000 xa zisetyenziswa kwimizi-mveliso eneshedyuli engqongqo yokugcinwa kwemihla ngemihla.
Q3: Lithini ixesha eliqhelekileyo lokuqhuba iiladle ze-slag ezinzima?
A: Iintsuku ezingama-35-45 emva kokuqinisekiswa kokugqibela kwemizobo yabathengi. Kufuneka iintsuku ezili-10 ukuya kwezili-15 ezongezelelweyo kwiindidi zezinto ezikhethekileyo okanye iziqinisekiso. Iiodolo ezingxamisekileyo ziyamkeleka xa ziceliwe.
Umbuzo 4: Ngaba singaqhuba uhlolo kwindawo ngexesha lemveliso?
A: Ewe, siyakwamkela ukuhlolwa kwendawo ngamaziko esithathu aphesheya kuquka i-SGS, i-BV, i-TÜV, i-ABS, i-LR, i-DNV njl. kuxhomekeke kwisivumelwano seshishini sangaphambili.
Q5: Ngaba unika iwaranti yesakhiwo esingenawo umngxuma?
A: Ewe. Zonke iiladle zethu ze-slag zenziwa ngeukuphoswa okuhlanganisiweyo kwenxalenye enyeayinazo ii-welding joints. Iyayiphepha imingxunya yokuqalisa ukuqhekeka, nto leyo ebangela i-70% yokusilela kwangaphambi kwexesha kwee-welding zesiqhelo.
Q6: Ngawaphi amanqanaba okuhlawula owamkelayo?
A: Siyamkela ukudluliselwa kwe-T/T ngentambo kunye ne-sight/usence L/C. Imigaqo eguquguqukayo kunye nezicwangciso zedipozithi ziyafumaneka kwiiodolo eziphindaphindwayo ngobuninzi.
Umbuzo 7: Ngawaphi amaxwebhu aza kunikwa kunye nokuthunyelwa?
A: Uza kufumana iSatifikethi soVavanyo lweZinto (MTC) esihambelanayo neEN 10204 3.1kunye3.2ifumaneka ngexabiso elongezelelweyo kwangaphambili.
Amaxwebhu apheleleyo aquka ingxelo yokwakheka kweekhemikhali, ingxelo yepropathi yoomatshini, ingxelo yonyango lobushushu, imizobo eyakhiweyo, iingxelo ezipheleleyo ze-NDT kuquka idatha yovavanyo lobukhulu be-ultrasonic, kunye nezikhokelo ezipheleleyo zokusebenza ngokukhuselekileyo kunye nokugcinwa.
10. Imbali yokuthumela ngaphandle kunye nezifundo zetyala
I-Womic Steel inikezele ngeeseti ezingaphezu kwama-500 zeeladle zeslag kwiifektri zentsimbi, iifoundries kunye nezibonelelo zesinyithi kumazwe angaphezu kwama-23. Ngezantsi kukho iireferensi zeprojekthi eziyinyani (ulwazi oluyimfihlo lwabathengi lushiyiwe):
Iprojekthi 1 - Isityalo seNtsimbi esiDibeneyo kuMzantsi-mpuma weAsia (eIndonesia):
Sinikezele ngeeladle zeslag ezinomthamo weetoni ezingama-85, ezifakwe kwinxalenye enye. Zenzelwe ukuhambelana ngokupheleleyo neeparamitha zezixhobo ze-OEM zokuqala ukuze zithathe indawo yeeladle zemveli zohlobo oluhlanganisiweyo. Emva kwemijikelo yenkonzo engama-4,200, ezi ladle bezisebenza ixesha elingaphezu kweminyaka eli-10.Iinyanga ezingama-28akukho ziphazamiso okanye iziphene.
Iprojekthi yesi-2 - Isityalo seNtsimbi yoMbane kwiNgingqi yaseBalkan (eMpuma Yurophu):
Umthengi wayefuna iiladle ze-chromium-nickel-molybdenum alloy slag ezifanelekileyo ukusebenza kubushushu obuphantsi kakhulu obungaphantsi kwama-35°C. Samkele intsimbi ye-GS-20Mn5 ehlangabezana ngokupheleleyo nemigangatho yovavanyo lweCharpy, sanikezela ngesatifikethi se-EN 10204 3.2 kunye neengxelo zokuhlolwa kwe-NDT ezisebenza ngokupheleleyo. Lo mthengi ufake ii-odolo eziphindaphindwayo kathathu ukuza kuthi ga ngoku.
Iprojekthi 3 – US Steel Mill enoMthwalo weCrane oNcinci:
Umthengi wayefuna iileyile zeslag ezikhaphukhaphu ukuze zihambelane nemida yomthwalo wekreyini ekhoyo kwindawo. Ngokusebenzisa ubuchwepheshe bokulinganisa i-CAE casting, sinciphise ngempumelelo ubunzima beleyile ngokubanzi18%, ngelixa kugcinwe kwaye kuphuculwe ngakumbi ukusebenza kokhuseleko lwesakhiwo.
Nxibelelana noMvelisi
Ukuba ufuna uhlahlo-lwabiwo mali ngaphandle kokuzibophelela okanye ufuna ingcebiso yobuchwepheshe kwiprojekthi yakho entsha, ungathandabuzi ukuqhagamshelana nathi.
Intsimbi yeWomic – Umthengisi wakho weSpoon yeSludge othembekileyo eTshayina
Iwebhusayithi: www.womicsteel.com
I-imeyile: sales@womicsteel.com
Umnxeba / i-WhatsApp / i-WeChat:
UVictor: +86 15575100681
UJack: +86 18390957568
I-Womic Steel iyila kwaye ivelise iileyile ze-slag ezenzelwe wena ngokweemfuno zabathengi. Amaqela ethu obunjineli kunye neentengiso anikezela ngeengcebiso zobungcali ezipheleleyo ngalo lonke ixesha.
Iimveliso eziNxulumeneyo
-
Isikhokelo sokukhetha izinto zeSlag Pot: ZG270-500, G...
-
Umenzi weSlag Pot | Intsimbi Enzima Ephosweyo S ...
-
Imbiza yeSlag yeLF/VD | I-Slag ekhethekileyo yeSithando seLadle...
-
Umenzi weNkuni enkulu yeSlag | I-Heavy-Duty 60-100...
-
Indlela Yokwandisa Ubomi Benkonzo Yembiza Yeslag: Ukulungisa...
-
Imbiza yeSlag ye-EAF | Isithando somlilo se-Electric Arc esikhethekileyo...
-
Ileyile yeSlag | Umenzi weLeyile yeSlag yentsimbi - Wo...
-
Imbiza yeSlag yeetoni ezingama-20-50 | Isitya seSlag esinomthamo ophakathi...
-
I-EN 10219 S460MH ERW Umbhobho weNtsimbi-Owona Mbhobho weNtsimbi...